DrRobot Jaguar User's Guide download pdf (Page 17)

www.DrRobot.com

V20.12.14

- 17 -

Device Default Network Settings

Note: The Ethernet modules are configured to serial-to-Ethernet mode in Jaguar platform.

Ethernet Module 1 192.168.0.60

Port 1 Port Number 10001, UDP 115200. 8, N, 1, no flow control

Port 2 Port Number 10002, TCP 19200. 8, N, 1, no flow control

Ethernet Module 2 192.168.0.61

Port 1 Port Number 10001, TCP 57600. 8, N, 1, no flow control

Port 2 Port Number 10002, TCP 115200. 8, N, 1, no flow control

Camera 192.168.0.65 Port 8081

User ID Root

Password drrobot

Advanced Network Settings

You could also change the Wireless AP/router settings such as IP and SSID etc., if you need to do so, you are

required to change the network settings on the Ethernet modules on the robot by following the guidelines as

illustrated on the Ethernet Module manual.

Please contact [email protected] if you need further support.

Hardware Architecture

The diagram below illustrates the inter-connection between the core electronic circuits and modules (some are

optional accessories).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

No comments

DrRobot Jaguar User's Guide Page 17