DrRobot Jaguar User's Guide download pdf (Page 14)

www.DrRobot.com

V20.12.14

- 14 -

data by right-clicking on “Temporary Places”, then choosing “Delete Contents”. (That is why we did not hide

Google Earth program)

On normal program exit, Google Earth will be closed. However, you should double check using “Windows Task

Manager”; otherwise, you may not be able to display Google Earth when you start Jaguar control program again.

Recharging

Jaguar robot uses high performance LiPo batteries. Extreme caution is needed when dealing with this type of

battery, explosion and damage could occur. Please read the Charge Station manual first and follow all the safety

rules before proceeding further.

1) Turn off the robot

2) Loose the screws of Battery Box, disconnect the 2-Pin Tamiya connector and take the Battery Box out.

3) Power on the Charge Station. Use

to make sure "LiPo BALANCE" is displayed on the LCD screen. If not,

use "Type/Stop" button to change battery type to "LiPo Battery" and press

to set charging mode to “LiPo BALANCE” .

4) You can use

+ / + buttons to change the charge

current, DO NOT exceed the 2A charging current and do not modify the battery voltage. It should be "22.2V

(6S)" for Jaguar robot.

5) Connect the charging 7-Pin, 3-Pin & 2-Pin connectors to charger as below images.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

No comments

DrRobot Jaguar User's Guide Page 14